NormPulse

Home › Legislation

EU Low Voltage Directive

2014/35/EU — 647 entries. Source: 02023D2723-20260430. Snapshot: 2026-08-16.

AnnexReferenceTitleWithdrawal
ANNEX IHD 308 S2:2001Identification of cores in cables and flexible cords
ANNEX IHD 368 S1:1978Direct acting recording electrical measuring instruments and their accessories
ANNEX IHD 549 S1:1989Conference systems – Electrical and audio requirements
ANNEX IHD 597 S1:1992Coupling capacitors and capacitor dividers
ANNEX IHD 603 S1:1994Distribution cables of rated voltage 0,6/1 kV
ANNEX IHD 604 S1:19940,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations
ANNEX IHD 626 S1:1996Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV
ANNEX IHD 627 S1:1996Multicore and multipair cables for installation above and below ground
ANNEX IHD 639 S1:2002Electrical accessories – Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
ANNEX IEN ISO 11252:2013Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252:2013)
ANNEX IEN 13637:2015Building hardware – Electrically controlled exit systems for use on escape routes – Requirements and test methods
ANNEX IEN 50065-4-2:2001Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz – Part 4-2: Low voltage decoupling
ANNEX IEN 50065-4-7:2005Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz – Part 4-7: Portable low voltage de
ANNEX IEN 50085-1:2005Cable trunking systems and cable ducting systems for electrical installations – Part 1: General requirements
ANNEX IEN 50085-2-1:2006Cable trunking systems and cable ducting systems for electrical installations – Part 2-1: Cable trunking systems and cable ducting systems intended fo
ANNEX IEN 50085-2-2:2008Cable trunking systems and cable ducting systems for electrical installations – Part 2-2: Particular requirements for cable trunking systems and cable
ANNEX IEN 50085-2-3:2010Cable trunking systems and cable ducting systems for electrical installations – Part 2-3: Particular requirements for slotted cable trunking systems i
ANNEX IEN 50085-2-4:2009Cable trunking systems and cable ducting systems for electrical installations – Part 2-4: Particular requirements for service poles and service posts
ANNEX IEN 50106:2008Safety of household and similar electrical appliances – Particular rules for routine tests referring to appliances under the scope of EN 60335-1
ANNEX IEN 50117-1:2002Coaxial cables – Part 1: Generic specification
ANNEX IEN 50117-2-1:2005Coaxial cables – Part 2-1: Sectional specification for cables used in cabled distribution networks – Indoor drop cables for systems operating at 5 MHz
ANNEX IEN 50117-2-2:2004Coaxial cables – Part 2-2: Sectional specification for cables used in cabled distribution networks – Outdoor drop cables for systems operating at 5 MH
ANNEX IEN 50117-2-3:2004Coaxial cables – Part 2-3: Sectional specification for cables used in cabled distribution networks – Distribution and trunk cables for systems operati
ANNEX IEN 50117-2-4:2004Coaxial cables – Part 2-4: Sectional specification for cables used in cabled distribution networks – Indoor drop cables for systems operating at 5 MHz
ANNEX IEN 50117-2-5:2004Coaxial cables – Part 2-5: Sectional specification for cables used in cabled distribution networks – Outdoor drop cables for systems operating at 5 MH
ANNEX IEN 50117-3-1:2002Coaxial cables – Part 3-1: Sectional specifications for cables used in Telecom applications – Miniaturized cables used in digital communication system
ANNEX IEN 50117-4-1:2008Coaxial cables – Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 – Indoor drop cables for systems operating a
ANNEX IEN 50117-4-2:2015Coaxial cables – Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks
ANNEX IEN 50156-1:2015Electrical equipment for furnaces and ancillary equipment – Part 1: Requirements for application design and installation
ANNEX IEN 50156-2:2015Electrical equipment for furnaces and ancillary equipment – Part 2: Requirements for design, development and type approval of safety devices and subsy
ANNEX IEN 50214:2006Flat polyvinyl chloride sheathed flexible cables
ANNEX IEN 50250:2002Conversion adaptors for industrial use
ANNEX IEN 50274:2002Low-voltage switchgear and controlgear assemblies – Protection against electric shock – Protection against unintentional direct contact with hazardous
ANNEX IEN 50288-1:2013Multi-element metallic cables used in analogue and digital communication and control – Part 1: Generic specification
ANNEX IEN 50288-2-1:2013Multi-element metallic cables used in analogue and digital communication and control – Part 2-1: Sectional specification for screened cables character
ANNEX IEN 50288-2-2:2013Multi-element metallic cables used in analogue and digital communication and control – Part 2-2: Sectional specification for screened cables character
ANNEX IEN 50288-3-1:2013Multi-element metallic cables used in analogue and digital communication and control – Part 3-1: Sectional specification for unscreened cables charact
ANNEX IEN 50288-3-2:2013Multi-element metallic cables used in analogue and digital communication and control – Part 3-2: Sectional specification for unscreened cables charact
ANNEX IEN 50288-4-1:2013Multi-element metallic cables used in analogue and digital communication and control – Part 4-1: Sectional specification for screened cables character
ANNEX IEN 50288-4-2:2013Multi-element metallic cables used in analogue and digital communication and control – Part 4-2: Sectional specification for screened cables character
ANNEX IEN 50288-5-1:2013Multi-element metallic cables used in analogue and digital communication and control – Part 5-1: Sectional specification for screened cables character
ANNEX IEN 50288-5-2:2013Multi-element metallic cables used in analogue and digital communication and control – Part 5-2: Sectional specification for screened cables character
ANNEX IEN 50288-6-1:2013Multi-element metallic cables used in analogue and digital communication and control – Part 6-1: Sectional specification for unscreened cables charact
ANNEX IEN 50288-6-2:2013Multi-element metallic cables used in analogue and digital communication and control – Part 6-2: Sectional specification for unscreened cables charact
ANNEX IEN 50288-7:2005Multi-element metallic cables used in analogue and digital communication and control – Part 7: Sectional specification for instrumentation and control
ANNEX IEN 50288-8:2012Multi-element metallic cables used in analogue and digital communication and control – Part 8: Specification for type 1 cables characterised up to 2 M
ANNEX IEN 50288-9-1:2012Multi-element metallic cables used in analogue and digital communication and control – Part 9-1: Sectional specification for screened cables character
ANNEX IEN 50288-9-2:2015Multi-element metallic cables used in analogue and digital communication and control – Part 9-2: Sectional specification for screened cables character
ANNEX IEN 50288-10-1:2012Multi-element metallic cables used in analogue and digital communication and control – Part 10-1: Sectional specification for screened cables characte
ANNEX IEN 50288-10-2:2015Multi-element metallic cables used in analogue and digital communication and control – Part 10-2: Sectional specification for screened cables characte
ANNEX IEN 50288-11-1:2012Multi-element metallic cables used in analogue and digital communication and control – Part 11-1: Sectional specification for un-screened cables chara
ANNEX IEN 50288-11-2:2015Multi-element metallic cables used in analogue and digital communication and control – Part 11-2: Sectional specification for un-screened cables, char
ANNEX IEN 50289-1-3:2001Communication cables – Specifications for test methods – Part 1-3: Electrical test methods – Dielectric strength
ANNEX IEN 50289-1-4:2001Communication cables – Specifications for test methods – Part 1-4: Electrical test methods – Insulation resistance
ANNEX IEN 50290-2-1:2005Communication cables – Part 2-1: Common design rules and construction
ANNEX IEN 50290-2-20:2001Communication cables – Part 2-20: Common design rules and construction – General
ANNEX IEN 50290-2-21:2001Communication cables – Part 2-21: Common design rules and construction – PVC insulation compounds
ANNEX IEN 50290-2-22:2001Communication cables – Part 2-22: Common design rules and construction – PVC sheathing compounds
ANNEX IEN 50290-2-23:2013Communication cables – Part 2-23: Common design rules and construction – Polyethylene insulation for multi-pair cables used in access telecommunicatio
ANNEX IEN 50290-2-24:2002Communication cables – Part 2-24: Common design rules and construction – PE sheathing
ANNEX IEN 50290-2-25:2013Communication cables – Part 2-25: Common design rules and construction – Polypropylene insulation compounds
ANNEX IEN 50290-2-26:2002Communication cables – Part 2-26: Common design rules and construction – Halogen free flame retardant insulation compounds
ANNEX IEN 50290-2-27:2002Communication cables – Part 2-27: Common design rules and construction – Halogen free flame retardant thermoplastic sheathing compounds
ANNEX IEN 50290-2-28:2002Communication cables – Part 2-28: Common design rules and construction – Filling compounds for filled cables
ANNEX IEN 50290-2-29:2002Communication cables – Part 2-29: Common design rules and construction – Cross-linked PE insulation compounds
ANNEX IEN 50290-2-30:2002Communication cables – Part 2-30: Common design rules and construction – Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing
ANNEX IEN 50290-4-1:2014Communication cables – Part 4-1: General considerations for the use of cables – Environmental conditions and safety aspects
ANNEX IEN 50290-4-2:2014Communication cables – Part 4-2: General considerations for the use of cables – Guide to use
ANNEX IEN 50364:2010Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surve
ANNEX IEN 50369:2005Liquid tight sheathing systems for cable management
ANNEX IEN 50406-1:2004End user multi-pair cables used in high bit rate telecommunication networks – Part 1: Aerial cables
ANNEX IEN 50406-2:2004End user multi-pair cables used in high bit rate telecommunication networks – Part 2: Duct and buried cables
ANNEX IEN 50407-1:2004Multi-pair cables used in high bit rate digital access telecommunication networks – Part 1: Outdoor cables
ANNEX IEN 50407-3:2014Multi-pair cables used in high bit rate digital access telecommunications networks – Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for max
ANNEX IEN 50428:2005Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and buildin
ANNEX IEN 50441-1:2012Cables for indoor residential telecommunication installations – Part 1: Unscreened cables – Grade 1
ANNEX IEN 50441-2:2012Cables for indoor residential telecommunication installations – Part 2: Screened cables – Grade 1
ANNEX IEN 50441-3:2006Cables for indoor residential telecommunication installations – Part 3: Screened cables – Grade 3
ANNEX IEN 50441-4:2012Cables for indoor residential telecommunication installations – Part 4: Cables up to 1 200 MHz – Grade 3
ANNEX IEN 50445:2008Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions re
ANNEX IEN 50491-4-1:2012General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 4-1: General functional
ANNEX IEN 50491-6-1:2014General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 6-1: HBES installations
ANNEX IEN 50520:2020Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
ANNEX IEN 50525-1:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 1: General requirements
ANNEX IEN 50525-2-11:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) – Part 2-11: Cables for general applications – Flex
ANNEX IEN 50525-2-12:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) – Part 2-12: Cables for general applications – Cabl
ANNEX IEN 50525-2-21:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) – Part 2-21: Cables for general applications – Flex
ANNEX IEN 50525-2-22:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-22: Cables for general applications – High
ANNEX IEN 50525-2-31:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-31: Cables for general applications – Sing
ANNEX IEN 50525-2-41:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-41: Cables for general applications – Sing
ANNEX IEN 50525-2-42:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-42: Cables for general applications – Sing
ANNEX IEN 50525-2-51:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-51: Cables for general applications – Oil
ANNEX IEN 50525-2-71:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-71: Cables for general applications – Flat
ANNEX IEN 50525-2-72:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-72: Cables for general applications – Flat
ANNEX IEN 50525-2-81:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-81: Cables for general applications – Cabl
ANNEX IEN 50525-2-82:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-82: Cables for general applications – Cabl
ANNEX IEN 50525-2-83:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-83: Cables for general applications – Mult
ANNEX IEN 50525-3-11:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-11: Cables with special fire performance –
ANNEX IEN 50525-3-21:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-21: Cables with special fire performance –
ANNEX IEN 50525-3-31:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-31: Cables with special fire performance –
ANNEX IEN 50525-3-41:2011Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-41: Cables with special fire performance –
ANNEX IEN 50539-11:2013Low-voltage surge protective devices – Surge protective devices for specific application including d.c. – Part 11: Requirements and tests for SPDs in
ANNEX IEN 50550:2011Power frequency overvoltage protective device for household and similar applications (POP)
ANNEX IEN 50556:2011Road traffic signal systems
ANNEX IEN 50615:2015Household and similar electrical appliances – Safety – Particular requirements for devices for fire prevention and suppression for electric hobs (cook
ANNEX IEN 50618:2014Electric cables for photovoltaic systems
ANNEX IEN 50620:2017Electric cables – Charging cables for electric vehicles
ANNEX IEN 50689:2021Safety of laser products – Particular Requirements for Consumer Laser Products
ANNEX IEN 60034-1:2010Rotating electrical machines – Part 1: Rating and performance
ANNEX IEN 60034-5:2001Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classificatio
ANNEX IEN 60034-6:1993Rotating electrical machines – Part 6: Methods of cooling (IC Code)#IEC 60034-6:1991
ANNEX IEN 60034-7:1993Rotating electrical machines – Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
ANNEX IEN 60034-8:2007Rotating electrical machines – Part 8: Terminal markings and direction of rotation
ANNEX IEN 60034-9:2005Rotating electrical machines – Part 9: Noise limits
ANNEX IEN 60034-11:2004Rotating electrical machines – Part 11: Thermal protection
ANNEX IEN 60034-12:2002Rotating electrical machines – Part 12: Starting performance of single-speed three-phase cage induction motors
ANNEX IEN 60034-14:2004Rotating electrical machines – Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and lim
ANNEX IEN 60051-1:1998Direct acting indicating analogue electrical measuring instruments and their accessories – Part 1: Definitions and general requirements common to all
ANNEX IEN 60051-2:1989Direct acting indicating analogue electrical measuring instruments and their accessories – Part 2: Special requirements for ammeters and voltmeters
ANNEX IEN 60051-3:1989Direct acting indicating analogue electrical measuring instruments and their accessories – Part 3: Special requirements for wattmeters and varmeters
ANNEX IEN 60051-4:1989Direct acting indicating analogue electrical measuring instruments and their accessories – Part 4: Special requirements for frequency meters
ANNEX IEN 60051-5:1989Direct acting indicating analogue electrical measuring instruments and their accessories – Part 5: Special requirements for phase meters, power factor
ANNEX IEN 60051-6:1989Direct acting indicating analogue electrical measuring instruments and their accessories – Part 6: Special requirements for ohmmeters (impedance meter
ANNEX IEN 60051-7:1989Direct acting indicating analogue electrical measuring instruments and their accessories – Part 7: Special requirements for multi-function instruments
ANNEX IEN 60051-8:1989Direct acting indicating analogue electrical measuring instruments and their accessories – Part 8: Special requirements for accessories
ANNEX IEN 60051-9:1989Direct acting indicating analogue electrical-measuring instruments and their accessories – Part 9: Recommended test methods
ANNEX IEN 60110-1:1998Power capacitors for induction heating installations – Part 1: General
ANNEX IEN 60127-1:2006Miniature fuses – Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links
ANNEX IEN 60127-2:2014Miniature fuses – Part 2: Cartridge fuse-links
ANNEX IEN 60127-3:1996Miniature fuses – Part 3: Sub-miniature fuse-links
ANNEX IEN 60127-4:2005Miniature fuses – Part 4: Universal modular fuse-links (UMF) – Through-hole and surface mount types
ANNEX IEN 60127-6:2014Miniature fuses – Part 6: Fuse-holders for miniature fuse-links
ANNEX IEN 60127-7:2016Miniature fuses – Part 7: Miniature fuse-links for special applications
ANNEX IEN 60143-2:2013Series capacitors for power systems – Part 2: Protective equipment for series capacitor banks
ANNEX IEN 60155:1995Glow-starters for fluorescent lamps
ANNEX IEN 60204-1:2018Safety of machinery – Electrical equipment of machines – Part 1: General requirements
ANNEX IEN 60204-32:2008Safety of machinery – Electrical equipment of machines – Part 32: Requirements for hoisting machines
ANNEX IEN 60215:1989Safety requirements for radio transmitting equipment
ANNEX IEN 60252-1:2011AC motor capacitors – Part 1: General – Performance, testing and rating – Safety requirements – Guidance for installation and operation
ANNEX IEN 60252-2:2011AC motor capacitors – Part 2: Motor start capacitors
ANNEX IEN 60255-27:2014Measuring relays and protection equipment – Part 27: Product safety requirements
ANNEX IEN 60269-1:2007Low-voltage fuses – Part 1: General requirements
ANNEX IHD 60269-2:2013Low-voltage fuses – Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) – Examples of
ANNEX IHD 60269-3:2010Low-voltage fuses – Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) –
ANNEX IEN 60269-4:2009Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
ANNEX IEN 60269-6:2011Low-voltage fuses – Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
ANNEX IEN 60309-1:1999Plugs, socket-outlets and couplers for industrial purposes – Part 1: General requirements
ANNEX IEN 60309-2:1999Plugs, socket-outlets and couplers for industrial purposes – Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
ANNEX IEN 60309-4:2007Plugs, socket-outlets and couplers for industrial purposes – Part 4: Switched socket-outlets and connectors with or without interlock
ANNEX IEN IEC 60320-1:2021Appliance couplers for household and similar general purposes – Part 1: General requirements
ANNEX IEN 60320-2-1:2000Appliance couplers for household and similar general purposes – Part 2-1: Sewing machine couplers
ANNEX IEN 60320-2-2:1998Appliance couplers for household and similar general purposes – Part 2-2: Interconnection couplers for household and similar equipment
ANNEX IEN IEC 60320-2-4:2021Appliance couplers for household and similar general purposes – Part 2-4: Couplers dependent on appliance weight for engagement
ANNEX IEN 60335-1:2012Household and similar electrical appliances – Safety – Part 1: General requirements
ANNEX IEN 60335-2-2:2010Household and similar electrical appliances – Safety – Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
ANNEX IEN 60335-2-3:2016Household and similar electrical appliances – Safety – Part 2-3: Particular requirements for electric irons
ANNEX IEN 60335-2-4:2010Household and similar electrical appliances – Safety – Part 2-4: Particular requirements for spin extractors
ANNEX IEN 60335-2-5:2015Household and similar electrical appliances – Safety – Part 2-5: Particular requirements for dishwashers
ANNEX IEN 60335-2-6:2015Household and similar electrical appliances – Safety – Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar applia
ANNEX IEN 60335-2-7:2010Household and similar electrical appliances – Safety – Part 2-7: Particular requirements for washing machines
ANNEX IEN 60335-2-8:2015Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
ANNEX IEN 60335-2-9:2003Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
ANNEX IEN 60335-2-10:2003Household and similar electrical appliances – Safety – Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
ANNEX IEN IEC 60335-2-11:2022Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers
ANNEX IEN 60335-2-12:2003Household and similar electrical appliances – Safety – Part 2-12: Particular requirements for warming plates and similar appliances
ANNEX IEN 60335-2-13:2010Household and similar electrical appliances – Safety – Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
ANNEX IEN 60335-2-15:2016Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids
ANNEX IEN 60335-2-16:2003Household and similar electrical appliances – Safety – Part 2-16: Particular requirements for food waste disposers
ANNEX IEN 60335-2-17:2013Household and similar electrical appliances – Safety – Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating ap
ANNEX IEN 60335-2-21:2021Household and similar electrical appliances – Safety – Part 2-21: Particular requirements for storage water heaters
ANNEX IEN 60335-2-23:2003Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care
ANNEX IEN IEC 60335-2-24:2022Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice m
ANNEX IEN IEC 60335-2-25:2021Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
ANNEX IEN 60335-2-26:2003Household and similar electrical appliances – Safety – Part 2-26: Particular requirements for clocks
ANNEX IEN 60335-2-27:2013Household and similar electrical appliances – Safety – Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared
ANNEX IEN 60335-2-28:2003Household and similar electrical appliances – Safety – Part 2-28: Particular requirements for sewing machines
ANNEX IEN 60335-2-29:2021Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for battery chargers
ANNEX IEN 60335-2-30:2009Household and similar electrical appliances – Safety – Part 2-30: Particular requirements for room heaters
ANNEX IEN 60335-2-31:2014Household and similar electrical appliances – Safety – Part 2-31: Particular requirements for range hoods and other cooking fume extractors
ANNEX IEN 60335-2-32:2003Household and similar electrical appliances – Safety – Part 2-32: Particular requirements for massage appliances
ANNEX IEN 60335-2-34:2013Household and similar electrical appliances – Safety – Part 2-34: Particular requirements for motor-compressors
ANNEX IEN 60335-2-35:2016Household and similar electrical appliances – Safety – Part 2-35: Particular requirements for instantaneous water heaters
ANNEX IEN 60335-2-36:2002Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob
ANNEX IEN 60335-2-37:2002Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers
ANNEX IEN 60335-2-38:2003Household and similar electrical appliances – Safety – Part 2-38: Particular requirements for commercial electric griddles and griddle grills
ANNEX IEN 60335-2-39:2003Household and similar electrical appliances – Safety – Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
ANNEX IEN 60335-2-40:2003Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifier
ANNEX IEN IEC 60335-2-41:2021Household and similar electrical appliances – Safety – Particular requirements for pumps
ANNEX IEN 60335-2-42:2003Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cooke
ANNEX IEN IEC 60335-2-43:2020Household and similar electrical appliances – Safety – Part 2-43: Particular requirements for clothes dryers and towel rails
ANNEX IEN 60335-2-44:2002Household and similar electrical appliances – Safety – Part 2-44: Particular requirements for ironers
ANNEX IEN 60335-2-45:2002Household and similar electrical appliances – Safety – Part 2-45: Particular requirements for portable heating tools and similar appliances
ANNEX IEN 60335-2-47:2003Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans
ANNEX IEN 60335-2-48:2003Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters
ANNEX IEN 60335-2-49:2003Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric appliances for keeping food and croc
ANNEX IEN 60335-2-50:2003Household and similar electrical appliances – Safety – Part 2-50: Particular requirements for commercial electric bains-marie
ANNEX IEN 60335-2-52:2003Household and similar electrical appliances – Safety – Part 2-52: Particular requirements for oral hygiene appliances
ANNEX IEN 60335-2-53:2011Household and similar electrical appliances – Safety – Part 2-53: Particular requirements for sauna heating appliances and infrared cabins
ANNEX IEN 60335-2-54:2008Household and similar electrical appliances – Safety – Part 2-54: Particular requirements for surface-cleaning appliances for household use employing
ANNEX IEN 60335-2-55:2003Household and similar electrical appliances – Safety – Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden
ANNEX IEN 60335-2-56:2003Household and similar electrical appliances – Safety – Part 2-56: Particular requirements for projectors and similar appliances
ANNEX IEN 60335-2-58:2005Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machines
ANNEX IEN 60335-2-59:2003Household and similar electrical appliances – Safety – Part 2-59: Particular requirements for insect killers
ANNEX IEN 60335-2-60:2003Household and similar electrical appliances – Safety – Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
ANNEX IEN 60335-2-61:2003Household and similar electrical appliances – Safety – Part 2-61: Particular requirements for thermal-storage room heaters
ANNEX IEN 60335-2-62:2003Household and similar electrical appliances – Safety – Part 2-62: Particular requirements for commercial electric rinsing sinks
ANNEX IEN 60335-2-65:2003Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances
ANNEX IEN 60335-2-66:2003Household and similar electrical appliances – Safety – Part 2-66: Particular requirements for water-bed heaters
ANNEX IEN 60335-2-70:2002Household and similar electrical appliances – Safety – Part 2-70: Particular requirements for milking machines
ANNEX IEN 60335-2-71:2003Household and similar electrical appliances – Safety – Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing a
ANNEX IEN 60335-2-73:2003Household and similar electrical appliances – Safety – Part 2-73: Particular requirements for fixed immersion heaters
ANNEX IEN 60335-2-74:2003Household and similar electrical appliances – Safety – Part 2-74: Particular requirements for portable immersion heaters
ANNEX IEN 60335-2-75:2004Household and similar electrical appliances – Safety – Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
ANNEX IEN 60335-2-78:2003Household and similar electrical appliances – Safety – Part 2-78: Particular requirements for outdoor barbecues
ANNEX IEN 60335-2-80:2003+6Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for fans
ANNEX IEN 60335-2-81:2003Household and similar electrical appliances – Safety – Part 2-81: Particular requirements for foot warmers and heating mats
ANNEX IEN 60335-2-82:2003Household and similar electrical appliances – Safety – Part 2-82: Particular requirements for amusement machines and personal service machines
ANNEX IEN 60335-2-83:2002Household and similar electrical appliances – Safety – Part 2-83: Particular requirements for heated gullies for roof drainage
ANNEX IEN 60335-2-85:2003Household and similar electrical appliances – Safety – Part 2-85: Particular requirements for fabric steamers
ANNEX IEN 60335-2-86:2003Household and similar electrical appliances – Safety – Part 2-86: Particular requirements for electric fishing machines
ANNEX IEN 60335-2-87:2002Household and similar electrical appliances – Safety – Part 2-87: Particular requirements for electrical animal-stunning equipment
ANNEX IEN 60335-2-88:2002Household and similar electrical appliances – Safety – Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation,
ANNEX IEN 60335-2-90:2006Household and similar electrical appliances – Safety – Part 2-90: Particular requirements for commercial microwave ovens
ANNEX IEN IEC 60335-2-96:2021Household and similar electrical appliances – Safety – Part 2-96: Particular requirements for flexible sheet heating elements for room heating
ANNEX IEN 60335-2-97:2006Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar
ANNEX IEN 60335-2-98:2003Household and similar electrical appliances – Safety – Part 2-98: Particular requirements for humidifiers
ANNEX IEN 60335-2-99:2003Household and similar electrical appliances – Safety – Part 2-99: Particular requirements for commercial electric hoods
ANNEX IEN 60335-2-101:2002Household and similar electrical appliances – Safety – Part 2-101: Particular requirements for vaporizers
ANNEX IEN 60335-2-102:2016Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having elect
ANNEX IEN IEC 60335-2-105:2021Household and similar electrical appliances – Safety – Part 2-105: Particular requirements for multifunctional shower cabinets
ANNEX IEN 60335-2-106:2007Household and similar electrical appliances – Safety – Part 2-106: Particular requirements for heated carpets and for heating units for room heating i
ANNEX IEN 60335-2-108:2008Household and similar electrical appliances – Safety – Part 2-108: Particular requirements for electrolysers
ANNEX IEN 60335-2-109:2010Household and similar electrical appliances – Safety – Part 2-109: Particular requirements for UV radiation water treatment appliances
ANNEX IEN 60358-1:2012Coupling capacitors and capacitor dividers – Part 1: General rules
ANNEX IEN 60360:1998Standard method of measurement of lamp cap temperature rise
ANNEX IEN 60399:2004Barrel thread for lampholders with shade holder ring
ANNEX IEN 60400:2017Lampholders for tubular fluorescent lamps and starterholders
ANNEX IEN 60423:2007Conduit systems for cable management – Outside diameters of conduits for electrical installations and threads for conduits and fittings
ANNEX IEN 60432-1:2000Incandescent lamps – Safety specifications – Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
ANNEX IEN 60432-2:2000Incandescent lamps – Safety specifications – Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
ANNEX IEN 60432-3:2013Incandescent lamps – Safety specifications – Part 3: Tungsten-halogen lamps (non-vehicle)
ANNEX IEN 60477:1997Laboratory d.c. resistors
ANNEX IEN 60477-2:1997Laboratory resistors – Part 2: Laboratory a.c. resistors
ANNEX IEN 60519-1:2015Safety in installations for electroheating and electromagnetic processing – Part 1: General requirements
ANNEX IEN 60519-2:2006Safety in electroheat installations – Part 2: Particular requirements for resistance heating equipment
ANNEX IEN 60519-3:2005Safety in electroheat installations – Part 3: Particular requirements for induction and conduction heating and induction melting installations
ANNEX IEN 60519-4:2013Safety in electroheating installations – Part 4: Particular requirements for arc furnace installations
ANNEX IEN 60519-6:2011Safety in electroheat installations – Part 6: Specifications for safety in industrial microwave heating equipment
ANNEX IEN 60519-7:2008Safety in electroheat installations – Part 7: Particular requirements for installations with electron guns
ANNEX IEN 60519-8:2005Safety in electroheat installations – Part 8: Particular requirements for electroslag remelting furnaces
ANNEX IEN 60519-9:2005Safety in electroheat installations – Part 9: Particular requirements for high-frequency dielectric heating installations
ANNEX IEN 60519-10:2013Safety in electroheating installations – Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercia
ANNEX IEN 60519-12:2013Safety in electroheating installations – Part 12: Particular requirements for infrared electroheating installations
ANNEX IEN 60519-21:2009Safety in electroheat installations – Part 21: Particular requirements for resistance heating equipment – Heating and melting glass equipment#IEC 6051
ANNEX IEN 60523:1993Direct-current potentiometers
ANNEX IEN 60524:1993Direct-current resistive volt ratio boxes
ANNEX IEN 60529:1991Degrees of protection provided by enclosures (IP Code)#IEC 60529:1989
ANNEX IEN 60564:1993D.C. bridges for measuring resistance
ANNEX IEN 60570:2003Electrical supply track systems for luminaires
ANNEX IEN IEC 60598-1:2021Luminaires – Part 1: General requirements and tests
ANNEX IEN 60598-2-1:1989Luminaires – Part 2: Particular requirements – Section 1: Fixed general purpose luminaires
ANNEX IEN 60598-2-2:2012Luminaires – Part 2-2: Particular requirements – Recessed luminaires
ANNEX IEN 60598-2-3:2003Luminaires – Part 2-3: Particular requirements – Luminaires for road and street lighting
ANNEX IEN 60598-2-4:2018Luminaires – Part 2: Particular requirements – Section 4: Portable general purpose luminaires
ANNEX IEN 60598-2-5:2015Luminaires – Part 2-5: Particular requirements – Floodlights
ANNEX IEN 60598-2-8:2013Luminaires – Part 2-8: Particular requirements – Handlamps
ANNEX IEN 60598-2-9:1989Luminaires – Part 2: Particular requirements – Section 9: Photo and film luminaires (non-professional)
ANNEX IEN 60598-2-10:2003Luminaires – Part 2-10: Particular requirements – Portable luminaires for children
ANNEX IEN 60598-2-11:2013Luminaires – Part 2-11: Particular requirements – Aquarium luminaires
ANNEX IEN 60598-2-12:2013Luminaires – Part 2-12: Particular requirements – Mains socket-outlet mounted nightlights
ANNEX IEN 60598-2-13:2006Luminaires – Part 2-13: Particular requirements – Ground recessed luminaires
ANNEX IEN 60598-2-14:2009Luminaires – Part 2-14: Particular requirements – Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment
ANNEX IEN IEC 60598-2-17:2018Luminaires – Part 2-17: Particular requirements – Luminaires for stage lighting, television and film studios (outdoor and indoor)
ANNEX IEN 60598-2-19:1989Luminaires – Part 2: Particular requirements – Section 19: Air-handling luminaires (safety requirements)
ANNEX IEN 60598-2-20:2015Luminaires – Part 2-20: Particular requirements – Lighting chains
ANNEX IEN 60598-2-21:2015Luminaires – Part 2-21: Particular requirements – Rope lights
ANNEX IEN IEC 60598-2-22:2022Luminaires – Part 2-22: Particular requirements – Luminaires for emergency lighting
ANNEX IEN IEC 60598-2-23:2021Luminaires – Part 2-23: Particular requirements – Extra-low-voltage lighting systems for ELV light sources
ANNEX IEN 60598-2-24:2013Luminaires – Part 2-24: Particular requirements – Luminaires with limited surface temperatures
ANNEX IEN 60598-2-25:1994Luminaires – Part 2-25: Particular requirements – Luminaires for use in clinical areas of hospitals and health care buildings
ANNEX IEN 60618:1997Inductive voltage dividers
ANNEX IEN 60645-1:2015Electroacoustics – Audiometric equipment – Part 1: Equipment for pure-tone audiometry
ANNEX IEN 60645-3:2007Electroacoustics – Audiometric equipment – Part 3: Test signals of short duration
ANNEX IEN 60645-6:2010Electroacoustics – Audiometric equipment – Part 6: Instruments for the measurement of otoacoustic emissions
ANNEX IEN 60645-7:2010Electroacoustics – Audiometric equipment – Part 7: Instruments for the measurement of auditory brainstem responses
ANNEX IEN 60664-1:2007Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests
ANNEX IEN 60664-3:2003Insulation coordination for equipment within low-voltage systems – Part 3: Use of coating, potting or moulding for protection against pollution
ANNEX IEN 60664-4:2006Insulation coordination for equipment within low-voltage systems – Part 4: Consideration of high-frequency voltage stress
ANNEX IEN 60669-1:2018Switches for household and similar fixed electrical installations – Part 1: General requirements
ANNEX IEN 60669-2-1:2004Switches for household and similar fixed electrical installations – Part 2-1: Particular requirements – Electronic switches
ANNEX IEN 60669-2-2:2006Switches for household and similar fixed electrical installations – Part 2-2: Particular requirements – Electromagnetic remote-control switches (RCS)
ANNEX IEN 60669-2-3:2006Switches for household and similar fixed electrical installations – Part 2-3: Particular requirements – Time delay switches (TDS)
ANNEX IEN 60669-2-4:2005Switches for household and similar fixed electrical installations – Part 2-4: Particular requirements – Isolating switches
ANNEX IEN 60669-2-6:2012Switches for household and similar fixed electrical installations – Part 2-6: Particular requirements – Fireman’s switches for exterior and interior s
ANNEX IEN IEC 60670-1:2021Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 1: General requirements
ANNEX IEN 60670-22:2006Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 22: Particular requirements for connec
ANNEX IEN 60688:2013Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
ANNEX IEN 60691:2016Thermal-links – Requirements and application guide
ANNEX IEN 60695-2-10:2013Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure
ANNEX IEN 60695-2-11:2014Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:201
ANNEX IEN 60695-10-2:2014Fire hazard testing – Part 10-2: Abnormal heat – Ball pressure test method
ANNEX IEN 60695-10-3:2002Fire hazard testing – Part 10-3: Abnormal heat – Mould stress relief distortion test
ANNEX IEN 60695-11-2:2014Fire hazard testing – Part 11-2: Test flames – 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance
ANNEX IEN 60695-11-3:2012Fire hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test methods
ANNEX IEN 60695-11-4:2011Fire hazard testing – Part 11-4: Test flames – 50 W flame – Apparatus and confirmational test method
ANNEX IEN 60695-11-5:2005Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance
ANNEX IEN 60695-11-10:2013Fire hazard testing – Part 11-10: Test flames – 50 W horizontal and vertical flame test methods
ANNEX IEN 60695-11-20:2015Fire hazard testing – Part 11-20: Test flames – 500 W flame test method
ANNEX IEN 60702-1:2002Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V – Part 1: Cables
ANNEX IEN 60702-2:2002Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V – Part 2: Terminations
ANNEX IEN 60715:2017Dimensions of low-voltage switchgear and controlgear – Standardized mounting on rails for mechanical support of switchgear, controlgear and accessorie
ANNEX IEN 60719:1993Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and i
ANNEX IEN 60728-11:2017Cable networks for television signals, sound signals and interactive services – Part 11: Safety
ANNEX IEN 60730-1:2011Automatic electrical controls for household and similar use – Part 1: General requirements
ANNEX IEN 60730-2-2:2002Automatic electrical controls for household and similar use – Part 2-2: Particular requirements for thermal motor protectors
ANNEX IEN 60730-2-3:2007Automatic electrical controls for household and similar use – Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluore
ANNEX IEN 60730-2-4:2007Automatic electrical controls for household and similar use – Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of
ANNEX IEN 60730-2-5:2015Automatic electrical controls – Part 2-5: Particular requirements for automatic electrical burner control systems
ANNEX IEN 60730-2-6:2016Automatic electrical controls – Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
ANNEX IEN 60730-2-7:2010Automatic electrical controls for household and similar use – Part 2-7: Particular requirements for timers and time switches
ANNEX IEN 60730-2-8:2002Automatic electrical controls for household and similar use – Part 2-8: Particular requirements for electrically operated water valves, including mech
ANNEX IEN 60730-2-9:2010Automatic electrical controls for household and similar use – Part 2-9: Particular requirements for temperature sensing controls
ANNEX IEN 60730-2-10:2007Automatic electrical controls for household and similar use – Part 2-10: Particular requirements for motor-starting relays
ANNEX IEN 60730-2-11:2008Automatic electrical controls for household and similar use – Part 2-11: Particular requirements for energy regulators
ANNEX IEN 60730-2-12:2006Automatic electrical controls for household and similar use – Part 2-12: Particular requirements for electrically operated door locks
ANNEX IEN 60730-2-13:2008Automatic electrical controls for household and similar use – Part 2-13: Particular requirements for humidity sensing controls
ANNEX IEN 60730-2-14:1997Automatic electrical controls for household and similar use – Part 2-14: Particular requirements for electric actuators
ANNEX IEN 60730-2-15:2010Automatic electrical controls for household and similar use – Part 2-15: Particular requirements for automatic electrical air flow, water flow and wat
ANNEX IEN 60730-2-19:2002Automatic electrical controls for household and similar use – Part 2-19: Particular requirements for electrically operated oil valves, including mecha
ANNEX IEN 60799:1998Electrical accessories – Cord sets and interconnection cord sets
ANNEX IEN 60825-1:2014Safety of laser products – Part 1: Equipment classification and requirements
ANNEX IEN 60825-2:2004Safety of laser products – Part 2: Safety of optical fibre communication systems (OFCS)
ANNEX IEN 60825-4:2006Safety of laser products – Part 4: Laser guards
ANNEX IEN 60825-12:2004Safety of laser products – Part 12: Safety of free space optical communication systems used for transmission of information
ANNEX IEN 60831-1:2014Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V – Part 1: General – Performance, t
ANNEX IEN 60831-2:2014Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V – Part 2: Ageing test, self-healin
ANNEX IEN 60838-1:2017Miscellaneous lampholders – Part 1: General requirements and tests
ANNEX IEN 60838-2-1:1996Miscellaneous lampholders – Part 2: Particular requirements – Section 1: Lampholders S14
ANNEX IEN 60838-2-2:2006Miscellaneous lampholders – Part 2-2: Particular requirements – Connectors for LED-modules
ANNEX IEN 60898-1:2019Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 1: Circuit-breakers for a.c. opera
ANNEX IEN 60898-2:2021Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 2: Circuit-breakers for a.c. and d
ANNEX IEN 60931-1:1996Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV – Part 1: General – Performance,
ANNEX IEN 60931-2:1996Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV – Part 2: Ageing test and destruc
ANNEX IEN 60931-3:1996Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV – Part 3: Internal fuses
ANNEX IEN IEC 60934:2019Circuit breakers for equipment (CBE)
ANNEX IEN 60947-1:2007Low-voltage switchgear and controlgear – Part 1: General rules
ANNEX IEN 60947-2:2017Low-voltage switchgear and controlgear – Part 2: Circuit-breakers
ANNEX IEN IEC 60947-3:2021Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
ANNEX IEN IEC 60947-4-1:2019Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
ANNEX IEN 60947-4-2:2012Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – AC semiconductor motor controllers and starters
ANNEX IEN 60947-4-3:2014Low-voltage switchgear and controlgear – Part 4-3: Contactors and motor-starters – AC semiconductor controllers and contactors for non-motor loads
ANNEX IEN 60947-5-1:2017Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices
ANNEX IEN 60947-5-3:1999Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined be
ANNEX IEN 60947-5-4:2003Low-voltage switchgear and controlgear – Part 5-4: Control circuit devices and switching elements – Method of assessing the performance of low-energy
ANNEX IEN 60947-5-5:1997Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical l
ANNEX IEN 60947-5-7:2003Low-voltage switchgear and controlgear – Part 5-7: Control circuit devices and switching elements – Requirements for proximity devices with analogue o
ANNEX IEN IEC 60947-5-8:2021Low-voltage switchgear and controlgear – Part 5-8: Control circuit devices and switching elements – Three-position enabling switches
ANNEX IEN 60947-5-9:2007Low-voltage switchgear and controlgear – Part 5-9: Control circuit devices and switching elements – Flow rate switches
ANNEX IEN 60947-6-1:2005Low-voltage switchgear and controlgear – Part 6-1: Multiple function equipment – Transfer switching equipment
ANNEX IEN 60947-6-2:2003Low-voltage switchgear and controlgear – Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS)
ANNEX IEN 60947-7-1:2009Low-voltage switchgear and controlgear – Part 7-1: Ancillary equipment – Terminal blocks for copper conductors
ANNEX IEN 60947-7-2:2009Low-voltage switchgear and controlgear – Part 7-2: Ancillary equipment – Protective conductor terminal blocks for copper conductors
ANNEX IEN 60947-7-3:2009Low-voltage switchgear and controlgear – Part 7-3: Ancillary equipment – Safety requirements for fuse terminal blocks
ANNEX IEN IEC 60947-9-1:2019Low-voltage switchgear and controlgear – Part 9-1: Active arc-fault mitigation systems – Arc quenching devices
ANNEX IEN 60950-21:2003Information technology equipment – Safety – Part 21: Remote power feeding
ANNEX IEN 60950-22:2006Information technology equipment – Safety – Part 22: Equipment installed outdoors
ANNEX IEN 60950-23:2006Information technology equipment – Safety – Part 23: Large data storage equipment
ANNEX IEN 60968:2015Self-ballasted fluorescent lamps for general lighting services – Safety requirements
ANNEX IEN IEC 60974-1:2018Arc welding equipment – Part 1: Welding power sources
ANNEX IEN IEC 60974-2:2019Arc welding equipment – Part 2: Liquid cooling systems
ANNEX IEN IEC 60974-3:2019Arc welding equipment – Part 3: Arc striking and stabilizing devices
ANNEX IEN IEC 60974-5:2019Arc welding equipment – Part 5: Wire feeders
ANNEX IEN 60974-6:2016Arc welding equipment – Part 6: Limited duty equipment
ANNEX IEN IEC 60974-7:2019Arc welding equipment – Part 7: Torches
ANNEX IEN IEC 60974-8:2021Arc welding equipment – Part 8: Gas consoles for welding and plasma cutting systems
ANNEX IEN IEC 60974-11:2021Arc welding equipment – Part 11: Electrode holders
ANNEX IEN 60974-12:2011Arc welding equipment – Part 12: Coupling devices for welding cables
ANNEX IEN IEC 60974-13:2021Arc welding equipment – Part 13: Welding current return clamp
ANNEX IEN 60998-1:2004Connecting devices for low-voltage circuits for household and similar purposes – Part 1: General requirements
ANNEX IEN 60998-2-1:2004Connecting devices for low-voltage circuits for household and similar purposes – Part 2-1: Particular requirements for connecting devices as separate
ANNEX IEN 60998-2-2:2004Connecting devices for low-voltage circuits for household and similar purposes – Part 2-2: Particular requirements for connecting devices as separate
ANNEX IEN 60998-2-3:2004Connecting devices for low-voltage circuits for household and similar purposes – Part 2-3: Particular requirements for connecting devices as separate
ANNEX IEN 60998-2-4:2005Connecting devices for low voltage circuits for household and similar purposes – Part 2-4: Particular requirements for twist-on connecting devices
ANNEX IEN 60999-1:2000Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units – Part 1: General requirement
ANNEX IEN 60999-2:2003Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units – Part 2: Particular requirem
ANNEX IEN 61008-1:2012Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) – Part 1: General rules
ANNEX IEN 61008-2-1:1994Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) – Part 2-1: Applicability o
ANNEX IEN 61009-1:2012Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 1: General rules
ANNEX IEN 61009-2-1:1994Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO’s) – Part 2-1: Applicability of t
ANNEX IEN 61010-1:2010Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements
ANNEX IEN IEC 61010-2-010:2020Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-010: Particular requirements for laboratory equipmen
ANNEX IEN IEC 61010-2-011:2021Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-011: Particular requirements for refrigerating equi
ANNEX IEN IEC 61010-2-012:2022Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-012: Particular requirements for climatic and enviro
ANNEX IEN 61010-2-020:2006Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-020: Particular requirements for laboratory centrif
ANNEX IEN IEC 61010-2-030:2021Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-030: Particular requirements for equipment having t
ANNEX IEN IEC 61010-2-032:2021Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-032: Particular requirements for hand-held and hand-
ANNEX IEN IEC 61010-2-033:2021Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-033: Particular requirements for hand-held multimet
ANNEX IEN IEC 61010-2-034:2021Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-034: Particular requirements for measurement equipm
ANNEX IEN IEC 61010-2-040:2021Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-040: Particular requirements for sterilizers and wa
ANNEX IEN IEC 61010-2-051:2021Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipmen
ANNEX IEN IEC 61010-2-061:2021Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-061: Particular requirements for laboratory atomic s
ANNEX IEN IEC 61010-2-081:2020Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-081: Particular requirements for automatic and semi-
ANNEX IEN IEC 61010-2-091:2021Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet X-ray syste
ANNEX IEN IEC 61010-2-130:2021Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-130: Particular requirements for equipment intended
ANNEX IEN IEC 61010-2-201:2018Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-201: Particular requirements for control equipment
ANNEX IEN IEC 61010-2-202:2021Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-202: Particular requirements for electrically operat
ANNEX IEN 61010-031:2015Safety requirements for electrical equipment for measurement, control and laboratory use – Part 031: Safety requirements for hand-held probe assemblie
ANNEX IEN 61028:1993Electrical measuring instruments – X-Y recorders
ANNEX IEN 61048:2006Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements
ANNEX IEN 61050:1992Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) – General and safety requ
ANNEX IEN IEC 61058-1:2018Switches for appliances – Part 1: General requirements
ANNEX IEN 61058-2-1:2011Switches for appliances – Part 2-1: Particular requirements for cord switches
ANNEX IEN 61058-2-4:2005Switches for appliances – Part 2-4: Particular requirements for independently mounted switches
ANNEX IEN 61058-2-5:2011Switches for appliances – Part 2-5: Particular requirements for change-over selectors
ANNEX IEN 61071:2007Capacitors for power electronics
ANNEX IEN 61095:2009Electromechanical contactors for household and similar purposes
ANNEX IEN 61131-2:2007Programmable controllers – Part 2: Equipment requirements and tests
ANNEX IEN 61138:2007Cables for portable earthing and short-circuiting equipment
ANNEX IEN 61140:2002Protection against electric shock – Common aspects for installation and equipment
ANNEX IEN 61143-1:1994Electrical measuring instruments – X-t recorders – Part 1: Definitions and requirements
ANNEX IEN 61143-2:1994Electrical measuring instruments – X-t recorders – Part 2: Recommended additional test methods
ANNEX IEN 61184:2017Bayonet lampholders
ANNEX IEN 61187:1994Electrical and electronic measuring equipment – Documentation
ANNEX IEN 61195:1999Double-capped fluorescent lamps – Safety specifications
ANNEX IEN 61199:2011Single-capped fluorescent lamps – Safety specifications
ANNEX IEN 61204:1995Low-voltage power supply devices, d.c. output – Performance characteristics
ANNEX IEN IEC 61204-7:2018Low-voltage switch mode power supplies – Part 7: Safety requirements
ANNEX IEN 61210:2010Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements
ANNEX IEN 61230:2008Live working – Portable equipment for earthing or earthing and short-circuiting
ANNEX IEN 61242:1997Electrical accessories – Cable reels for household and similar purposes
ANNEX IEN 61243-3:2014Live working – Voltage detectors – Part 3: Two-pole low-voltage type
ANNEX IEN 61270-1:1996Capacitors for microwave ovens – Part 1: General
ANNEX IEN IEC 61293:2020Marking of electrical equipment with ratings related to electrical supply – Safety requirements
ANNEX IEN 61310-1:2008Safety of machinery – Indication, marking and actuation – Part 1: Requirements for visual, acoustic and tactile signals
ANNEX IEN 61310-2:2008Safety of machinery – Indication, marking and actuation – Part 2: Requirements for marking
ANNEX IEN 61310-3:2008Safety of machinery – Indication, marking and actuation – Part 3: Requirements for the location and operation of actuators
ANNEX IEN 61316:1999Industrial cable reels
ANNEX IEN 61347-1:2015Lamp controlgear – Part 1: General and safety requirements
ANNEX IEN 61347-2-2:2012Lamp controlgear – Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
ANNEX IEN 61347-2-3:2011Lamp control gear – Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
ANNEX IEN 61347-2-7:2012Lamp controlgear – Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
ANNEX IEN 61347-2-8:2001Lamp controlgear – Part 2-8: Particular requirements for ballasts for fluorescent lamps
ANNEX IEN 61347-2-9:2013Lamp controlgear – Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
ANNEX IEN 61347-2-10:2001Lamp controlgear – Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular disch
ANNEX IEN 61347-2-11:2001Lamp controlgear – Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
ANNEX IEN 61347-2-12:2005Lamp controlgear – Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
ANNEX IEN 61347-2-13:2014Lamp controlgear – Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
ANNEX IEN IEC 61347-2-14:2018Lamp controlgear – Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
ANNEX IEN 61386-1:2008Conduit systems for cable management – Part 1: General requirements
ANNEX IEN 61386-21:2004Conduit systems for cable management – Part 21: Particular requirements – Rigid conduit systems
ANNEX IEN 61386-22:2004Conduit systems for cable management – Part 22: Particular requirements – Pliable conduit systems
ANNEX IEN 61386-23:2004Conduit systems for cable management – Part 23: Particular requirements – Flexible conduit systems
ANNEX IEN 61386-25:2011Conduit systems for cable management – Part 25: Particular requirements – Conduit fixing devices
ANNEX IEN 61439-1:2011Low-voltage switchgear and controlgear assemblies – Part 1: General rules
ANNEX IEN 61439-2:2011Low-voltage switchgear and controlgear assemblies – Part 2: Power switchgear and controlgear assemblies
ANNEX IEN 61439-3:2012Low-voltage switchgear and controlgear assemblies – Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
ANNEX IEN 61439-4:2013Low-voltage switchgear and controlgear assemblies – Part 4: Particular requirements for assemblies for construction sites (ACS)
ANNEX IEN 61439-5:2015Low-voltage switchgear and controlgear assemblies – Part 5: Assemblies for power distribution in public networks
ANNEX IEN 61439-6:2012Low-voltage switchgear and controlgear assemblies – Part 6: Busbar trunking systems (busways)
ANNEX IEN 61534-1:2011Powertrack systems – Part 1: General requirements
ANNEX IEN 61534-21:2014Powertrack systems – Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
ANNEX IEN 61534-22:2014Powertrack systems – Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation
ANNEX IEN IEC 61535:2019Installation couplers intended for permanent connection in fixed installations
ANNEX IEN 61537:2007Cable management – Cable tray systems and cable ladder systems
ANNEX IEN 61549:2003Miscellaneous lamps
ANNEX IEN 61557-1:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-2:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-3:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-4:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-5:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-6:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-7:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-8:2015Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-9:2015Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-10:2013Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-11:2009Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN IEC 61557-12:2022Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective m
ANNEX IEN 61557-13:2011Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-14:2013Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-15:2014Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN 61557-16:2015Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti
ANNEX IEN IEC 61558-1:2019Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests
ANNEX IEN 61558-2-1:2007Safety of power transformers, power supplies, reactors and similar products – Part 2-1: Particular requirements and tests for separating transformers
ANNEX IEN 61558-2-2:2007Safety of power transformers, power supplies, reactors and similar products – Part 2-2: Particular requirements and tests for control transformers and
ANNEX IEN 61558-2-3:2010Safety of transformers, reactors, power supply units and combinations thereof – Part 2-3: Particular requirements and tests for ignition transformers
ANNEX IEN 61558-2-4:2009Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-4: Particular requirements and te
ANNEX IEN 61558-2-5:2010Safety of transformers, reactors, power supply units and combinations thereof – Part 2-5: Particular requirements and tests for transformer for shaver
ANNEX IEN 61558-2-6:2009Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-6: Particular requirements and te
ANNEX IEN 61558-2-7:2007Safety of power transformers, power supplies, reactors and similar products – Part 2-7: Particular requirements and tests for transformers and power s
ANNEX IEN 61558-2-8:2010Safety of transformers, reactors, power supply units and combinations thereof – Part 2-8: Particular requirements and tests for transformers and power
ANNEX IEN 61558-2-9:2011Safety of transformers, reactors, power supply units and combinations thereof – Part 2-9: Particular requirements and tests for transformers and power
ANNEX IEN 61558-2-12:2011Safety of transformers, reactors, power supply units and combinations thereof – Part 2-12: Particular requirements and tests for constant voltage tran
ANNEX IEN 61558-2-13:2009Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-13: Particular requirements and t
ANNEX IEN 61558-2-14:2013Safety of transformers, reactors, power supply units and combination thereof – Part 2-14: Particular requirements and tests for variable transformers
ANNEX IEN 61558-2-15:2012Safety of transformers, reactors, power supply units and combinations thereof – Part 2-15: Particular requirements and tests for isolating transformer
ANNEX IEN 61558-2-16:2009Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-16: Particular requirements and t
ANNEX IEN 61558-2-20:2011Safety of transformers, reactors, power supply units and combinations thereof – Part 2-20: Particular requirements and tests for small reactors
ANNEX IEN 61558-2-23:2010Safety of transformers, reactors, power supply units and combinations thereof – Part 2-23: Particular requirements and tests for transformers and powe
ANNEX IEN 61558-2-26:2013Safety of transformers, reactors, power supply units and combinations thereof – Part 2-26: Particular requirements and tests for transformers and powe
ANNEX IEN 61643-11:2012Low-voltage surge protective devices – Part 11: Surge protective devices connected to low-voltage power systems – Requirements and test methods
ANNEX IEN 61643-21:2001Low voltage surge protective devices – Part 21: Surge protective devices connected to telecommunications and signalling networks – Performance require
ANNEX IEN 61643-31:2019Low-voltage surge protective devices – Part 31: Requirements and test methods for SPDs for photovoltaic installations
ANNEX IEN IEC 61730-1:2018Photovoltaic (PV) module safety qualification – Part 1: Requirements for construction
ANNEX IEN IEC 61730-2:2018Photovoltaic (PV) module safety qualification – Part 2: Requirements for testing
ANNEX IEN 61770:2009Electric appliances connected to the water mains – Avoidance of backsiphonage and failure of hose-sets
ANNEX IEN 61800-5-1:2007Adjustable speed electrical power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy
ANNEX IEN 61812-1:2011Time relays for industrial and residential use – Part 1: Requirements and tests
ANNEX IEN 61851-21:2002Electric vehicle conductive charging system – Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply
ANNEX IEN 61851-23:2014Electric vehicle conductive charging system – Part 23: DC electric vehicle charging station
ANNEX IEN 61851-24:2014Electric vehicle conductive charging system – Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of
ANNEX IEN 61869-1:2009Instrument transformers – Part 1: General requirements
ANNEX IEN 61869-2:2012Instrument transformers – Part 2: Additional requirements for current transformers
ANNEX IEN 61869-3:2011Instrument transformers – Part 3: Additional requirements for inductive voltage transformers
ANNEX IEN 61869-4:2014Instrument transformers – Part 4: Additional requirements for combined transformers
ANNEX IEN 61869-5:2011Instrument transformers – Part 5: Additional requirements for capacitor voltage transformers
ANNEX IEN IEC 61914:2021Cable cleats for electrical installations
ANNEX IEN 61921:2003Power capacitors – Low-voltage power factor correction banks
ANNEX IEN 61995-1:2008Devices for the connection of luminaires for household and similar purposes – Part 1: General requirements
ANNEX IEN 61995-2:2009Devices for the connection of luminaires for household and similar purposes – Part 2: Standard sheets for DCL
ANNEX IEN 62020:1998Electrical accessories – Residual current monitors for household and similar uses (RCMs)
ANNEX IEN 62026-1:2007Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 1: General rules
ANNEX IEN 62026-2:2013Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 2: Actuator sensor interface (AS-i)
ANNEX IEN 62026-3:2015Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 3: DeviceNet
ANNEX IEN 62026-7:2013Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 7: CompoNet
ANNEX IEN IEC 62031:2020LED modules for general lighting – Safety specifications
ANNEX IEN 62035:2014Discharge lamps (excluding fluorescent lamps) – Safety specifications
ANNEX IEN IEC 62040-1:2019Uninterruptible power systems (UPS) – Part 1: Safety requirements
ANNEX IEN 62080:2009Sound signalling devices for household and similar purposes
ANNEX IEN 62094-1:2003Indicator light units for household and similar fixed-electrical installations – Part 1: General requirements
ANNEX IEN 62109-1:2010Safety of power converters for use in photovoltaic power systems – Part 1: General requirements
ANNEX IEN 62109-2:2011Safety of power converters for use in photovoltaic power systems – Part 2: Particular requirements for inverters
ANNEX IEN 62135-1:2015Resistance welding equipment – Part 1: Safety requirements for design, manufacture and installation
ANNEX IEN 62196-1:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements
ANNEX IEN 62196-2:2012Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility and interc
ANNEX IEN 62196-3:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 3: Dimensional compatibility and interc
ANNEX IEN 62208:2011Empty enclosures for low-voltage switchgear and controlgear assemblies – General requirements
ANNEX IEN 62233:2008Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
ANNEX IEN 62253:2011Photovoltaic pumping systems – Design qualification and performance measurements
ANNEX IEN IEC 62275:2019Cable management systems – Cable ties for electrical installations
ANNEX IEN 62282-3-100:2012Fuel cell technologies – Part 3-100: Stationary fuel cell power systems – Safety
ANNEX IEN 62282-3-300:2012Fuel cell technologies – Part 3-300: Stationary fuel cell power systems – Installation
ANNEX IEN 62282-5-1:2012Fuel cell technologies – Part 5-1: Portable fuel cell power systems – Safety
ANNEX IEN 62310-1:2005Static transfer systems (STS) – Part 1: General and safety requirements
ANNEX IEN 62311:2008Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz)
ANNEX IEN 62368-1:2014Audio/video, information and communication technology equipment – Part 1: Safety requirements (IEC 62368-1:2014, modified)
ANNEX IEN 62395-1:2013Electrical resistance trace heating systems for industrial and commercial applications – Part 1: General and testing requirements
ANNEX IEN 62423:2012Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
ANNEX IEN 62444:2013Cable glands for electrical installations
ANNEX IEN 62471:2008Photobiological safety of lamps and lamp systems
ANNEX IEN 62477-1:2012Safety requirements for power electronic converter systems and equipment – Part 1: General
ANNEX IEN 62479:2010Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic
ANNEX IEN 62493:2010Assessment of lighting equipment related to human exposure to electromagnetic fields
ANNEX IEN 62532:2011Fluorescent induction lamps – Safety specifications
ANNEX IEN 62549:2011Articulated systems and flexible systems for cable guiding
ANNEX IEN 62560:2012Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications
ANNEX IEN 62606:2013General requirements for arc fault detection devices
ANNEX IEN 62626-1:2014Low-voltage switchgear and controlgear enclosed equipment – Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolatio
ANNEX IHD 62640:2015Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
ANNEX IEN 62776:2015Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications
ANNEX IEN 62868:2015Organic light emitting diode (OLED) panels for general lighting – Safety requirements
ANNEX IEN 62949:2017Particular safety requirements for equipment to be connected to information and communication networks
ANNEX IEN 63024:2018Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
ANNEX IEN IEC 63044-3:2018Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 3: Electrical safety requirements
ANNEX IIEN 60335-2-24:2010Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice m13.6.2025
ANNEX IIEN 60335-2-30:2009Household and similar electrical appliances – Safety – Part 2-30: Particular requirements for room heaters17.9.2024
ANNEX IIEN 60598-2-22:2014Luminaires – Part 2-22: Particular requirements – Luminaires for emergency lighting11.7.2024
ANNEX IIEN 61347-2-7:2012Lamp controlgear – Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)11.7.2024
ANNEX IIEN 62423:2012Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses17.9.2024
ANNEX IIIHD 361 S3:1999System for cable designation13.6.2025
ANNEX IIIHD 605 S2:2008Electric cables – Additional test methods13.6.2025
ANNEX IIIEN 50363-0:2011Insulating, sheathing and covering materials for low-voltage energy cables – Part 0: General introduction13.6.2025
ANNEX IIIEN 50363-1:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 1: Cross-linked elastomeric insulating compounds13.6.2025
ANNEX IIIEN 50363-2-1:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 2-1: Cross-linked elastomeric sheathing compounds13.6.2025
ANNEX IIIEN 50363-2-2:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 2-2: Cross-linked elastomeric covering compounds13.6.2025
ANNEX IIIEN 50363-3:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 3: PVC insulating compounds13.6.2025
ANNEX IIIEN 50363-4-1:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 4-1: PVC sheathing compounds13.6.2025
ANNEX IIIEN 50363-4-2:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 4-2: PVC covering compounds13.6.2025
ANNEX IIIEN 50363-5:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 5: Halogen-free, cross-linked insulating compounds13.6.2025
ANNEX IIIEN 50363-6:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 6: Halogen-free, cross-linked sheathing compounds13.6.2025
ANNEX IIIEN 50363-7:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 7: Halogen-free, thermoplastic insulating compounds13.6.2025
ANNEX IIIEN 50363-8:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 8: Halogen-free, thermoplastic sheathing compounds13.6.2025
ANNEX IIIEN 50363-9-1:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 9-1: Miscellaneous insulating compounds – Cross-linked polyvinyl chl13.6.2025
ANNEX IIIEN 50363-10-1:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 10-1: Miscellaneous sheathing compounds – Cross-linked polyvinyl chl13.6.2025
ANNEX IIIEN 50363-10-2:2005Insulating, sheathing and covering materials for low voltage energy cables – Part 10-2: Miscellaneous sheathing compounds – Thermoplastic polyurethane13.6.2025
ANNEX IIIEN 50395:2005Electrical test methods for low voltage energy cables13.6.2025
ANNEX IIIEN 50396:2005Non electrical test methods for low voltage energy cables13.6.2025
ANNEX IIIEN 50497:2007Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables13.6.2025
ANNEX IIIEN 50565-1:2014Electric cables – Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) – Part 1: General guidance13.6.2025
ANNEX IIIEN 50565-2:2014Electric cables – Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) – Part 2: Specific guidance related to EN 50525 cable ty13.6.2025
ANNEX IIIEN 60228:2005Conductors of insulated cables13.6.2025
ANNEX IIIEN 60332-1-1:2004Tests on electric and optical fibre cables under fire conditions – Part 1-1: Test for vertical flame propagation for a single insulated wire or cable 13.6.2025
ANNEX IIIEN 60332-1-2:2004Tests on electric and optical fibre cables under fire conditions – Part 1-2: Test for vertical flame propagation for a single insulated wire or cable 13.6.2025
ANNEX IIIEN 60332-1-3:2004Tests on electric and optical fibre cables under fire conditions – Part 1-3: Test for vertical flame propagation for a single insulated wire or cable 13.6.2025
ANNEX IIIEN 60332-2-1:2004Tests on electric and optical fibre cables under fire conditions – Part 2-1: Test for vertical flame propagation for a single small insulated wire or 13.6.2025
ANNEX IIIEN 60332-2-2:2004Tests on electric and optical fibre cables under fire conditions – Part 2-2: Test for vertical flame propagation for a single small insulated wire or 13.6.2025
ANNEX IIIEN 60332-3-10:2009Tests on electric and optical fibre cables under fire conditions – Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or ca13.6.2025
ANNEX IIIEN 60332-3-21:2009Tests on electric and optical fibre cables under fire conditions – Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or ca13.6.2025
ANNEX IIIEN 60332-3-22:2009Tests on electric and optical fibre cables under fire conditions – Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or ca13.6.2025
ANNEX IIIEN 60332-3-23:2009Tests on electric and optical fibre cables under fire conditions – Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or ca13.6.2025
ANNEX IIIEN 60332-3-24:2009Tests on electric and optical fibre cables under fire conditions – Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or ca13.6.2025
ANNEX IIIEN 60332-3-25:2009Tests on electric and optical fibre cables under fire conditions – Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or ca13.6.2025
ANNEX IIIEN 60335-2-11:2010Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers17.9.2024
ANNEX IIIEN 60598-1:2015Luminaires – Part 1: General requirements and tests11.7.2024
ANNEX IIIEN 60598-2-11:2013Luminaires – Part 2-11: Particular requirements – Aquarium luminaires17.9.2024
ANNEX IIIEN 60754-1:2014Test on gases evolved during combustion of materials from cables – Part 1: Determination of the halogen acid gas content13.6.2025
ANNEX IIIEN 60754-2:2014Test on gases evolved during combustion of materials from cables – Part 2: Determination of acidity (by pH measurement) and conductivity13.6.2025
ANNEX IIIEN 60811-100:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 100: General13.6.2025
ANNEX IIIEN 60811-201:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 201: General tests – Measurement of insulation thickness13.6.2025
ANNEX IIIEN 60811-202:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 202: General tests – Measurement of thickness of non-metallic sheat13.6.2025
ANNEX IIIEN 60811-203:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 203: General tests – Measurement of overall dimensions13.6.2025
ANNEX IIIEN 60811-301:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 301: Electrical tests – Measurement of the permittivity at 23 °C of13.6.2025
ANNEX IIIEN 60811-302:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 302: Electrical tests – Measurement of the d.c. resistivity at 23 °13.6.2025
ANNEX IIIEN 60811-401:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 401: Miscellaneous tests – Thermal ageing methods – Ageing in an ai13.6.2025
ANNEX IIIEN 60811-402:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 402: Miscellaneous tests – Water absorption tests13.6.2025
ANNEX IIIEN 60811-403:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 403: Miscellaneous tests – Ozone resistance test on cross-linked co13.6.2025
ANNEX IIIEN 60811-404:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 404: Miscellaneous tests – Mineral oil immersion tests for sheaths13.6.2025
ANNEX IIIEN 60811-405:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 405: Miscellaneous tests – Thermal stability test for PVC insulatio13.6.2025
ANNEX IIIEN 60811-406:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 406: Miscellaneous tests – Resistance to stress cracking of polyeth13.6.2025
ANNEX IIIEN 60811-407:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 407: Miscellaneous tests – Measurement of mass increase of polyethy13.6.2025
ANNEX IIIEN 60811-408:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 408: Miscellaneous tests – Long-term stability test of polyethylene13.6.2025
ANNEX IIIEN 60811-409:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 409: Miscellaneous tests – Loss of mass test for thermoplastic insu13.6.2025
ANNEX IIIEN 60811-410:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 410: Miscellaneous tests – Test method for copper-catalyzed oxidati13.6.2025
ANNEX IIIEN 60811-411:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 411: Miscellaneous tests – Low-temperature brittleness of filling c13.6.2025
ANNEX IIIEN 60811-412:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 412: Miscellaneous tests – Thermal ageing methods – Ageing in an ai13.6.2025
ANNEX IIIEN 60811-501:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 501: Mechanical tests – Tests for determining the mechanical proper13.6.2025
ANNEX IIIEN 60811-502:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 502: Mechanical tests – Shrinkage test for insulations13.6.2025
ANNEX IIIEN 60811-503:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 503: Mechanical tests – Shrinkage test for sheaths13.6.2025
ANNEX IIIEN 60811-504:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 504: Mechanical tests – Bending tests at low temperature for insula13.6.2025
ANNEX IIIEN 60811-505:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 505: Mechanical tests – Elongation at low temperature for insulatio13.6.2025
ANNEX IIIEN 60811-506:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 506: Mechanical tests – Impact test at low temperature for insulati13.6.2025
ANNEX IIIEN 60811-507:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 507: Mechanical tests – Hot set test for cross-linked materials13.6.2025
ANNEX IIIEN 60811-508:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 508: Mechanical tests – Pressure test at high temperature for insul13.6.2025
ANNEX IIIEN 60811-509:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 509: Mechanical tests – Test for resistance of insulations and shea13.6.2025
ANNEX IIIEN 60811-510:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 510: Mechanical tests – Methods specific to polyethylene and polypr13.6.2025
ANNEX IIIEN 60811-511:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 511: Mechanical tests – Measurement of the melt flow index of polye13.6.2025
ANNEX IIIEN 60811-512:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 512: Mechanical tests – Methods specific to polyethylene and polypr13.6.2025
ANNEX IIIEN 60811-513:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 513: Mechanical tests – Methods specific to polyethylene and polypr13.6.2025
ANNEX IIIEN 60811-601:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 601: Physical tests – Measurement of the drop point of filling comp13.6.2025
ANNEX IIIEN 60811-602:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 602: Physical tests – Separation of oil in filling compounds13.6.2025
ANNEX IIIEN 60811-603:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 603: Physical tests – Measurement of total acid number of filling c13.6.2025
ANNEX IIIEN 60811-604:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 604: Physical tests – Measurement of absence of corrosive component13.6.2025
ANNEX IIIEN 60811-605:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 605: Physical tests – Measurement of carbon black and/or mineral fi13.6.2025
ANNEX IIIEN 60811-606:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 606: Physical tests – Methods for determining the density#IEC 6081113.6.2025
ANNEX IIIEN 60811-607:2012Electric and optical fibre cables – Test methods for non-metallic materials – Part 607: Physical tests – Test for the assessment of carbon black dispe13.6.2025
ANNEX IIIEN 61034-1:2005Measurement of smoke density of cables burning under defined conditions – Part 1: Test apparatus13.6.2025
ANNEX IIIEN 61034-2:2005Measurement of smoke density of cables burning under defined conditions – Part 2: Test procedure and requirements13.6.2025
ANNEX IIIEN 61557-12:2008Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protecti11.7.2024